AbsorbentKing
Regulations

The Code of Federal Regulations (CFR) contains the regulations of the executive departments and agencies of the U.S. federal government. It is updated annually and divided into 50 titles. SpillTech® Products can aid in complying with many regulations, but they particularly help with certain rules from the following agencies:

OSHA (Occupational Safety and Health Administration) in Title 29EPA (Environmental Protection Agency) in Title 40DOT (Department of Transportation) in Title 4929 CFR 1910.22(a)(2) refers you to the following: This guide gives only an overview of regulations that SpillTech industrial customers encounter most often. For full information on compliance requirements, please refer to the original language in the Code of Federal Regulations. To read any part of the Code of Federal Regulations for free, visit the following page on the GPO (Government Printing Office) website: www.gpoaccess.gov/cfr/index.html Though it may look confusing, a citation simply tells you how to find the regulation in the CFR. For example, Please note: You’ll find a field where you can enter a citation to find it quickly. Note that you will view an entire section and will need to find the specific citation area.

1.Assess the Risk If possible, identify the material and volume spilled to judge possible effects on people, the environment and property. Refer to the container’s label or MSDS (Material Safety Data

2.Select PPE Use MSDS and other literature to choose Personal Protective Equipment such as gloves and suits. If you can’t identify the liquid and its properties, use the highest level of protection.

3.Confine the Spill Block or divert the spill to avoid water source contamination and ease cleanup. Consider using sorbents as well as non-absorbent barriers.

4.Stop the Source Stopping a spill at its source may mean closing a valve, plugging a leak or setting a container upright.You may also need to transfer liquid out of a damaged container.

5.Implement Cleanup Chemically-compatible sorbents quickly capture spilled liquid. Sorbents won’t change a liquid’s properties, however, so dispose of saturated sorbents as you would the liquid itself. Cleanup may involve placing spill remains in OverPacks or Salvage Drums.

6.Decontaminate To protect the health and safety of responders and others, neutralize or remove and properly dispose of accumulated hazardous materials. This may even include exposed earth.

7.Complete Reports Complete all medical and incident notifications and reports required by your organization, as well as by local, state and Federal requirements.

 

 

Product Information
All information provided about SpillTech® products is based upon testing and data believed to be accurate. However, the reliability of this information is not subject to any guarantee.

Handling and Disposal
Liquids absorbed by SpillTech® products are not rendered less hazardous, less toxic or less flammable by absorption; liquids remain in their original states. Therefore, caution in the handling, storage, disposal or cleaning of SpillTech® products after use should be in accordance with the original liquids absorbed. Consult the Material Safety Data Sheet of each liquid absorbed for proper handling. SpillTech® products must be transported and disposed of in compliance with local, state and federal regulations. SpillTech and Absorbent King does not recommend specific procedures due to variances in regulations, applications and liquids used.

Warranty
SpillTech and Absorbent King will replace any product found to be defective in material or workmanship. This warranty shall only apply where the buyer has issued written notice to SpillTech ans Absorbent King within thirty (30) days of purchase; it does not extend to product abuse, misuse, neglect or accident, nor to product repaired or altered by any other than SpillTech. This warranty is exclusive and in lieu of all other warranties, expressed or implied.

Limitation of Liability
In no event will SpillTech's and Absorbent King's liability for its Products exceed the purchase price paid for its Products. SpillTech and Absorbent King will not be liable under any circumstances for any special, indirect, consequential, or punitive damages, including, but not limited to loss of profits, loss of business opportunities, or loss of goodwill, even if advised of the possibility of such damages.